KitchenAid blenders are convenient kitchen appliances. You can use them for preparing smoothies, soups, juices, hummus, nut milk, milkshakes, and more. These blenders won’t disappoint you whether you like to blend, grind, puree, or crush vegetables, fruits, cheese, or any other ingredients.
However, your KitchenAid blenders are susceptible to malfunctions like any other electric appliance. As a user, you may encounter some inconveniences. We will point out those here. Simultaneously, we will provide you with troubleshooting suggestions for those specific issues.
Table of Contents
KitchenAid Blender Not Working!
There could be several reasons why your KitchenAid blender isn’t working. We will discuss those reasons below, along with their probable solutions.
Why Is Your KitchenAid Blender Not Working & What To Do?
1. Faulty wall outlet:
A KitchenAid blender is an electric gadget. It can’t work without a sufficient power supply. And a sufficient power supply is impossible without a sound wall outlet. Your KitchenAid blender won’t work if you connect its power cord to a faulty wall outlet.
In such a situation, ensure that the blender’s power outlet is in good working order.
2. Damaged or loosely connected power cord:
Your KitchenAid blender’s power cord must be properly plugged into the wall outlet. Your appliance won’t work if it is connected incorrectly or is damaged in some way.
So, make sure the power cord is properly plugged in. If it is damaged, purchase a new power cord to replace it.
3. Insufficient electricity supply:
Your KitchenAid blender won’t work when your house experiences an inadequate power supply.
Using a voltmeter, determine the voltage of your house’s electricity in such a situation. Your appliance won’t work if the voltage is below the requirement. Therefore, ensure that sufficient electricity is available to operate the blender.
4. Damaged motor:
The motor of the KitchenAid blender is housed inside its base. It functions to rotate the blades for cutting and crushing the desired ingredients. Your blender won’t work if its motor is damaged.
If this occurs, you must purchase a new motor to replace the damaged one. Contact a professional who can help you replace it. However, contact the KitchenAid blender customer service if your blender still carries the KitchenAid blender warranty.
Jamming could also be the reason why Your KitchenAid blender isn’t working. A blender works by cutting ingredients into small pieces and blending them. If the blades of your blender do not move, something may be preventing them from whirling.
In this case, examine the source of the jamming. The majority of the time, jamming is caused by debris stuck in the blender’s blades. Remove the debris carefully. You can usually clean the blades by disassembling and cleaning each blade at a time.
6. Improper assembly:
Your KitchenAid blender won’t work if you don’t assemble the blender correctly. Problems with the motor, blades, or seals can result from poor assembly.
In such a situation, you should disassemble the blender first. Then reassemble it by following the KitchenAid blender user manual.
KitchenAid Blender Not Turning On!
You might find that your KitchenAid blender isn’t turning on. Don’t get baffled and dump the blender in the junk. Your KitchenAid blender probably won’t turn on for a few causes. How about we dive into those causes and figure out their solutions?
Why Is Your KitchenAid Blender Not Turning On & What To Do?
1. The blender isn’t connected to the power source:
You might have difficulty turning on your KitchenAid blender if you haven’t plugged its power cord into a power source.
In this case, verify the blender’s connection to the wall outlet.
2. The power outlet is defective and inoperable:
You may have already inserted the power cord of your KitchenAid blender into a wall outlet. However, it is not turning on.
In this situation, you must ensure that the wall outlet used for your blender is functional. You can do this by plugging the blender into another outlet. If your blender turns on, you can be sure that the wall outlet you used earlier for the KitchenAid blender was defective and inoperable.
3. Damaged power cord:
If the power cord of your KitchenAid blender gets damaged or becomes ineffective due to wear or overuse, it will not turn on.
It would be best to replace a damaged power cord to operate your device. A new power cord for your KitchenAid blender can be purchased from several online stores.
4. Inadequate supply of electricity:
If there isn’t an adequate electricity supply at your residence, your KitchenAid blender won’t turn on.
Check the voltage of your house’s electricity. If the voltage is insufficient, you can’t turn on your blender. Therefore, verify that sufficient electricity is available to power your gadget.
5. The parts are assembled incorrectly:
Probably, the parts of your KitchenAid blender are not assembled correctly. As a result, it is not turning on.
You can solve this problem by installing the blender pitcher, collar, blades, and base of your blender according to the instructions given in the instruction manual of the KitchenAid blender.
6. Defective motor:
If the motor of the KitchenAid blender becomes defective, it will not turn on.
Verify that the blender’s motor is working. You can get assistance from a technician regarding this issue. If the motor gets damaged, you may need to purchase a new one to repair the damaged one. Contact KitchenAid blender customer care for a replacement if the product still covers the warranty.
7. The thermal fuse is burned out:
If the thermal fuse in your KitchenAid blender is blown, it won’t turn on. A thermal fuse in a blender cuts off the power supply when the motor reaches a specific temperature. It does so to prevent permanent damage and overheating of the appliance.
Check the motor switch or the circuit board for the burned-out fuse after removing the blender base cover. If it is blown, replace it with a new one. But don’t open it yourself, or don’t take it to a technician if your blender is still under warranty. In that case, directly contact the customer care of the KitchenAid blender.
8. Burned control board:
Your KitchenAid blender won’t turn on when its control board gets burned.
So, let a seasoned technician check the control board of your blender. It is located inside the base of your blender. Replace the control board if it is burned.
9. Damaged blender:
Your Kitchen Aid blender has eventually been damaged if none of those causes and solutions described earlier work. In this case, you have two choices: Buy a new blender or take it to a trained technician for repair. Contact KitchenAid customer service to request a replacement if the manufacturer’s warranty covers your blender.
KitchenAid Blender Motor Not Working!
The motor of a blender is considered its heart. When you connect the blender to an electrical power source and switch it on, its motor lets the shaft rotate very speedily. The coupler-attached blades will also rotate at the same speed when the shaft spins. However, the motor of your KitchenAid blender may not work for several reasons. We are going to find out the causes and probable remedies for this issue.
Why Is Your KitchenAid Blender Motor Not Working & What To Do?
1. The motor gets overheated:
Your KitchenAid blender’s motor may not work if it gets overheated.
Overheating occurs when your blender motor works continuously without a break. They are not designed for extended use. In general, they are manufactured to provide a short burst of high power to the appliance. This brief burst usually continues for around 1 minute. A blender motor hardly lasts more than a few minutes without overheating because there is not enough airflow to cool the motor. This could cause your blender’s motor to shut down temporarily, even sometimes permanently.
In such a situation, stop the power supply to the blender. Let your blender have some rest. Cool it down. After at least 5 minutes, plug it into the power source to turn it on again. If the motor works this time, it is fine. Otherwise, you need a technician to replace the damaged motor.
2. The control board gets damaged:
A blender control board, also known as the input circuit board, has different elements. They collaborate to rotate the motor and control its mechanism. When the control board of your KitchenAid blender becomes damaged, its motor won’t work.
In such a condition, let a technician inspect the control board of your blender. The control board must be replaced if it is damaged.
3. The thermal fuse gets blown:
A thermal fuse in a blender suspends the power supply when the motor gains a particular temperature. It does this to keep the appliance safe from overheating and permanent damage. Your KitchenAid blender’s motor won’t work if the thermal fuse gets blown.
In such a case, replace the blown thermal fuse with a new one.
4. Bearings in the blade assembly stuck:
There are bearings in the blade assembly of the blender. They may become stuck when tiny food particles or liquid seep through. In that condition, the motor will work harder than it should. As a result, it may overheat or burn out and cease to work.
If the motor is burned out, you should replace it. If it gets overheated, disconnect the blender from the power source and let it cool down. Then disassemble the appliance. Clean the blade assembly and the bearings following the instructions manual of your KitchenAid blender.
5. The motor gets damaged:
The motor of your KitchenAid blender may stop working simply due to overuse.
In this case, you can take it to a repair shop. Ask for the suggestion of the technician. He may advise you to replace the damaged motor with a new one if the other parts and components of the blender are okay. Otherwise, he will suggest you buy a new KitchenAid blender.
KitchenAid Blender Not Spinning!
You may occasionally encounter one of the most common problems with your KitchenAid blender. That is, your blender isn’t spinning. It could happen for a variety of reasons. Now we’ll talk about them and their solutions:
Why Is Your KitchenAid Blender Not Spinning & What To Do?
- The container is overfilled:
Your KitchenAid blender may not spin if its container is overfilled with food.
We know that the blades of the blenders chop and crush food ingredients. However, that only works smoothly when the blades get sufficient space to rotate. If the container is overloaded with food, the blades become unable to spin. Because in that condition, the blender automatically turns off to safeguard the motor.
Always maintain the maximum limit of food mentioned in your KitchenAid blender instructions manual to avoid such a mishap.
2. Adequate water is not added:
Your KitchenAid blender may not spin if you do not add adequate water to the recipe placed in the container.
Water is required for blending since it makes the process of blending simple and easy. Nevertheless, if the blades of the blender don’t get sufficient water to function, they may stop spinning.
For the right amount of water for a particular recipe, you should better study the KitchenAid blender recipes mentioned in the user manual.
The blades of your KitchenAid blender may not spin due to jamming. Usually, jamming occurs when the blade is clogged with food particles.
In this instance, you have to clean the blades. First, unplug the appliance. Disassemble the blades with caution. Wash each blade individually.
4. Improper blade assembly:
Because of improper blade assembly, the blades of your KitchenAid blender may not spin.
In such circumstances, unplug the blender first. Dismantle the improperly assembled blades. Reassemble the blades according to the instructions written in the KitchenAid blender user manual.
5. Power issues:
Your KitchenAid blender may not spin if it encounters any power issues. Power issues can occur if the wall outlet is faulty, the power cord of your blender is loosely connected, or the thermal fuse of your blender is blown up, even if your locality or house experiences a power crisis.
In such a condition, you have to verify several things. Such as -the wall outlet, the power cord, and the thermal fuse are in working order. Besides, ensure there is an adequate power supply in your house to run the appliance.
KitchenAid Blender Not Blending!
Sometimes your KitchenAid blender may not blend. This issue is not surprising at all. A few reasons might be blameworthy for this problem. Let us talk about those, along with their potential fixes.
Why Is Your Kitchen Blender Not Blending & What To Do?
1. The wall outlet is defective:
You need to plug the power cord of your KitchenAid blender into a wall outlet to turn the appliance on. Otherwise, you can’t even think of blending at all with your blender. However, if that particular wall outlet becomes defective or damaged, you can’t run the device, and consequently, it won’t blend.
The solution is very simple. Either repair that wall outlet or use a different one for your blender.
2. The power cord is damaged:
If the wall outlet is okay, still your KitchenAid blender is not blending; check the power cord of your blender. A damaged power cord can’t supply power to the blender. Therefore, the blender can’t blend.
Replace the power cord of your blender if it is damaged. You can search on the internet by writing ‘KitchenAid blender replacement parts ’. You will surely find a replacement power cord for your blender.
3. The power supply is insufficient:
To run the motor of your KitchenAid blender, a sufficient amount of electricity supply is needed. If it is unavailable, your blender’s motor won’t be turned on, and there will be no blending.
Hence, be sure there is sufficient electricity available to operate your device.
4. The motor is burned out:
If the motor of your KitchenAid blender is burned out or damaged because of overuse, or inappropriate dealing, the blender will not blend.
Check to see that your blender’s motor works. You should replace the damaged motor with the help of a professional if the product’s warranty has expired.
5. The thermal fuse is blown:
If the thermal fuse of your KitchenAid blender is blown, the power supply to the blender will be stopped. As a result, the motor of the blender won’t rotate the shaft responsible for spinning the blades. So, no blending will be possible.
In this situation, you should replace the blown fuse. You can easily purchase a new one from a nearby hardware shop.
6. Incorrect blade assembly:
For cleaning purposes, you may have disassembled your KitchenAid blender’s blades. When you have reassembled them, you have probably done that incorrectly. That’s why your blender is not blending.
In such a condition, you need to disassemble the blades coupling again. Reassemble the blades according to the instructions mentioned in the user manual of your KitchenAid blender.
7. Jammed blades:
If the blades of your KitchenAid blender get jammed, your blender won’t blend. Something could be stopping your blender’s blades from spinning if they are not moving. In most cases, the blades of a blender get jammed when debris gets stuck on them.
Hence, you need to clean debris stuck on the blades. We recommend you follow the cleaning procedure mentioned in your blender’s instruction manual.
8. The pitcher is overladen:
When the pitcher of your KitchenAid blender is overladen with food ingredients, it shuts off on its own to protect the motor. As a consequence, your blender won’t blend.
To determine the precise capacity of ingredients you must use in your blender, it is usually recommended that you read the user manual.
9. Sufficient water is not used:
If you don’t use enough water for the recipe in the blender jar, your KitchenAid blender might not blend. Water is necessary for blending. It makes the blending procedure quick and uncomplicated. However, the blender’s blades may stop rotating if they don’t get enough water to work.
To figure out how much water to use for a particular recipe, you should look more closely at the KitchenAid blender recipes provided in the user manual.
10. Poor assembly:
If the pitcher is not appropriately fixed to its base, your KitchenAid blender won’t blend.
In this situation, disassembling the blender is the first step. To assemble the KitchenAid blender again, stick to the directions written in the user manual.
11. Defective blender:
If none of the previously mentioned causes and solutions work, your KitchenAid blender has finally been damaged.
In this case, either buy a new blender or have it fixed by a skilled technician. If your blender is still under the manufacturer’s warranty, you can request a replacement by contacting KitchenAid customer service.
KitchenAid Blender Making Loud Noise!
When a blender works, a number of its parts rotate at high speed inside it. Thus, they make noises. But if you find that your KitchenAid blender is making crushing or high-pitched sounds, you may assume that it needs to be inspected. Through experience, we have come to know that a few parts of the blender demand our specific attention when such unusual loud noises are created. Let us discuss the origins of the loud noises and our would-be activities to troubleshoot such an issue.
Why Is Your KitchenAid Blender Making Loud Noise & How To Reduce Noise?
1. The bearings in the blade assembly are worn:
If the bearings in the blade assembly of your KitchenAid blender are worn out, your blender might be making a loud noise while operating.
You need to change the bearings. However, we suggest you change the entire blade assembly in such a condition.
2. The motor bearings are damaged:
Your KitchenAid blender may make a loud noise while operating if its motor bearings are damaged.
It is unusual to replace the motor bearings alone. You will be unable to get them in the market. So, you would rather purchase a new motor to replace the old one. Take assistance from a technician in this regard.
3. The pitcher base is cracked or broken:
During operation, your KitchenAid blender may make a loud noise if the pitcher base or collar is cracked or broken.
Typically, a pitcher base or collar of a blender is a round unit. There is a hole in its center. The blade assembly is placed on top of it. If it is fractured or broken, the pitcher won’t sit properly on the blender’s base where the motor is located. As a result, a loud noise could be produced. You need to change the pitcher base or collar of your blender. You can find them in various online markets.
4. The coupling is damaged or worn out:
A blender’s coupling attaches the base of the blender to its pitcher. You’ll find the coupling on the top of your blender’s base. Your KitchenAid blender may make a loud noise if the coupling is partially or fully damaged.
The coupling will make a lot of noise when it gets damaged or worn out, usually indicating that one of its teeth has broken off. Generally, it happens when the blades get encumbered. In that case, the coupling needs to be changed. They are available in a variety of online markets.
KitchenAid Blender Leaking!
Your KitchenAid blender may leak for various causes. Luckily, some of them have very easy remedies. However, professionals should check the other causes responsible for your blender leaking and fix those issues. Let’s discuss those reasons and their solutions below:
Why Is Your KitchenAid Blender Leaking & What To Do?
1. The rubber gasket is damaged or worn out:
The rubber gasket is housed under the blade assembly. It looks like an O-shaped ring and is made of rubber. It is expandable and prone to wear and tear. Your KitchenAid blender may leak if its rubber gasket is damaged or worn out.
In this case, you need to disassemble the appliance first. Replace the damaged or worn-out rubber gasket with a new one. Assemble your blender again and give it a try.
2. The pitcher is cracked:
Your KitchenAid blender may leak if there is a crack in its pitcher. We place food ingredients inside the pitcher. It keeps them together during blending. So, if it somehow gets a small crack on it, food ingredients will come out through it, and possibly the pitcher will break at some point.
In such a situation, you need to replace the cracked jar as soon as possible with a new one. You can search online markets on your computer or smartphone by writing ‘KitchenAid blender replacement parts’. You surely can purchase a new replacement pitcher easily in this way.
3. The pitcher is overfilled:
Your KitchenAid blender generates a particular level of pressure in the chamber of its pitcher during operation. This chamber requires a small amount of air to function the blending procedure effectively. When you overfill the pitcher with food and liquid, it would be difficult for your blender to handle the pressure inside the pitcher properly. As a result, your appliance may face a leakage issue.
To avoid such a problem, never overfill your pitcher with food or liquid. Always maintain the specific amount of food or liquid indicated in your KitchenAid blender user manual.
4. The lid is cracked:
Your KitchenAid blender may leak if its lid is cracked. This problem may arise if you somehow drop it down hard or simply because you have been using it for a long period.
If the lid is cracked, you have to look for a new lid to replace the cracked one. You can have suggestions from the technicians too.
5. The lid remains loose:
Your KitchenAid blender may leak if its lid remains loose during blending. If the lid is not tightly closed, the crushed blended food inside the pitcher will ultimately make its way out. In a blender, if there is an opening through which air may escape, food will also make its way out there.
Always tighten the lid of your blender before blending.
6. The watertight integrity around the shaft area fails:
The blade compartment is connected to the shaft of the blender’s motor, and it is sealed watertight. However, the watertight integrity around the shaft area might fail because of prolonged use, and food particles may lodge there. As a result, your blender may start leaking.
In such a situation, we suggest you take the blender to a professional.
Hi! I’m Manzur Hossain. I’m a modern electric kitchen appliance expert. Professionally, I’m a kitchen appliance researcher, reviewer, and repairer.
I want to make people’s lives in the kitchen easier, and that is why I have established appliancefact.com.