Ninja Air Fryer Troubleshooting (7 Problems Solutions)

7 Most Common Ninja Air Fryer Problems Solutions!

A Ninja air fryer is a small kitchen appliance that fits the lifestyles of busy folks in today’s high-tech world. It is a countertop convection oven. You may use it to make quick, healthy, and delicious meals. It has the unique ability to use very little or no oil and make meals exceptionally crispy. Proteins cooked in it are specifically juicy and tender. Additionally, cooking using this air fryer rather than an oven keeps your kitchen cool when it’s hot outdoors.

However, there’s no rose without a thorn. You may face certain inconveniences as a user of Ninja air fryers. We will identify those here. At the same time, we will provide you with troubleshooting ideas for those particular problems.

 Ninja Air Fryer Not Working!

After using your ninja air fryer for a while, it may happen that the fryer is not working anymore. Don’t get upset. Of course, there are some reasons behind it. We have listed below those possible reasons with their troubleshooting tips.

Why Is Your Ninja Air Fryer Not Working?

1. Incorrectly installed basket:

Probably, you have incorrectly installed the basket inside your Ninja air fryer. It is not working for this reason.

So, install the basket inside the air fryer appropriately before using it.

2. Defective or damaged power outlet:

If you connect the power cord of your ninja air fryer to a defective or damaged wall outlet, your Ninja air fryer might not work. Being an electrical gadget, it won’t work without an adequate power supply.

Therefore, ensure the power outlet you use for your Ninja air fryer is not faulty or damaged.

3. Loosely connected or damaged power cord:

The power cord of your Ninja air fryer has a two-pin plug. You have to plug it properly into the wall outlet. If it is loosely connected, your machine won’t work. Besides, if the power cord of your Ninja air fryer is damaged, your air fryer won’t work.

 So, ensure the power cord is up to the mark.

4. Broken or damaged heating element:

The heating element or the heater of your Ninja air fryer is one of its most vital parts. If it somehow becomes broken or damaged, your Ninja air fryer won’t work.

 That’s why be sure that the heating element of your air fryer is in order.

5. Defective circuit board:

An essential part of an air fryer is its circuit board. Your Ninja air fryer won’t operate if its circuit board is defective or burned.

Therefore, confirm that the circuit board in your Ninja air fryer is in perfect working order.

6. Broken or Damaged motor:

If the motor of your Ninja air fryer is damaged due to frequent usage, abuse, or improper handling, the air fryer won’t operate.

Make sure the motor of your air fryer functions.

7. Inadequate electricity supply:

Your Ninja air fryer won’t operate if it can’t get adequate electricity. So, confirm that your air fryer has access to a reliable power source.

Ensure that the power outlet and power cord are in good condition and can supply your air fryer with enough power.

8. Defective internal parts:

Your Ninja air fryer won’t function if any of its internal parts become defective.

Check those parts to ensure they are in good condition. You can also take assistance from a certified technician to address this issue.

9. Standby mode:

If your Ninja air fryer is in its standby mode, it won’t work. The controls will not respond in this mode.

You can hit the power button on your air fryer to activate the control panel of the fryer.

10. Damaged air fryer:

If the reasons and troubleshooting tips mentioned above don’t work, your Ninja air fryer has finally been damaged.

In this situation, you have two options: either replace the air fryer by purchasing a new one or take it to a qualified technician for repair. If your Ninja air fryer is still under warranty, you should contact the Ninja air fryer customer service team to inquire about getting a replacement.

Check The Latest Price On Amazon

Ninja Air Fryer Not Turning On!

You may find that your Ninja air fryer is not turning on. Neither get frustrated nor dump the fryer in the trash. Your Ninja air fryer might not turn on for several causes. Let’s dig into those causes and find out their solutions.

Why Is Your Ninja Air Fryer Not Turning On?

The most common causes for your Ninja air fryer not turning on are power button issues, power supply issues, power source issues, defective power cord, faulty thermal fuse, and damaged heating element. Also, your Ninja air fryer is not turning on for internal issues, a damaged circuit board, a damaged motor, a damaged air fryer, a power button is not turned on, inadequate power supply, improperly placed basked, factory defects, and more.
Details

1. The air fryer isn’t connected to the power source:

You might have trouble turning on your Ninja air fryer if it is unplugged or has a loose power cord.

Verify the appliance’s connection to the power source. Ensure that you have plugged it securely into the wall outlet.

2. Non-functional power socket:

A situation may arise that you have already plugged the air fryer in. However, it is not going to turn on.

You should check whether the power socket you are using for your Ninja air fryer is functional or non-functional. For this, you can plug your air fryer into another socket. If your air fryer turns on, you can confirm that the previous power socket used for your Ninja air fryer is defective and non-functional.

3. Defective or damaged power cord:

Your Ninja air fryer won’t turn on if its power cord is damaged.

 To run your gadget, you have to change a damaged power cord. You can buy a replacement power cord for your Ninja air fryer from various online marketplaces.

4. Inadequate Power Supply:

Your Ninja air fryer won’t turn on if the power supply is inadequate.

 In such a situation, measure the voltage of the electricity in your house with a voltmeter. If the voltage is low, you cannot operate your appliance. So, ensure an adequate power supply to run the device.

5. Improperly installed basket:

Perhaps, you haven’t installed the Ninja air fryer’s basket in its proper place. So your air fryer won’t turn on.

Ensure the basket is installed correctly to solve this issue.

6. Damaged heating element:

One of your Ninja air fryer’s essential parts is its heating element. It is a small coil of wire positioned close to the appliance’s bottom. Your Ninja air fryer won’t work if it gets broken or damaged.

Therefore, check to see that your air fryer’s heating element is in working condition.

You May Also Like:

Ninja Air Fryer Heating Element Not Working! 20 Causes And Solutions

7.  Internal parts-related problems:

The Ninja air fryer will not turn on if it has any problems inside. Inspect every part of the air fryer. Verify that no internal issues exist and that each component is securely attached.

Contact the Ninja customer service team or take your air fryer to a technician if you can’t identify internal problems.

8. Burned circuit board:

Your Ninja air fryer will not turn on if its circuit board becomes defective or burned.

Therefore, inspect the circuit board of your air fryer. Either replace the circuit board by purchasing a new one or take your air fryer to a technician for repair if it becomes damaged or burned.

9. Non-functional motor:

The Ninja air fryer won’t turn on if its motor is damaged.

Make sure the air fryer’s motor is functional. If it doesn’t function, you can contact a technician.

10. Damaged air fryer:

Your Ninja air fryer has eventually been damaged if the causes and troubleshooting suggestions we have already noted do not work. In a condition like this, you can purchase a new one to replace the damaged one or take it to an expert for repair. You can contact the retailer and manufacturer for a replacement if its warranty continues.

 Ninja Air fryer Fan Working!

The fan plays one of the significant roles in the Ninja air fryer’s entire cooking mechanism. It circulates the heat produced by the heating element through the hot air inside the cooking chamber. However, if the fan does not work, you should fix this issue as soon as possible to run the air fryer’s operation smoothly.  Your air fryer fan might not be working for several reasons.

Let’s have a look at those problems along with their troubleshooting:

Why Is Your Ninja Air Fryer Fan Not Working?

1. Defective and inoperative fan:

The fan on your Ninja air fryer has likely become defective and inoperative.

Firstly, look at the fan and ensure it’s in good condition. If the fan becomes defective and damaged, buy a new one to replace it. Otherwise, you can take the fryer to an air fryer professional for repair.

2. Physical obstruction in the fan:

If foreign bodies or other pieces of debris get stuck on the fan of your Ninja air fryer, it may stop spinning. The fan stops working accordingly.

Wipe all debris and foreign bodies off the fan blades with a clean cloth. In addition, disentangle each piece of hair or fiber found around the fan’s motor.

3. Damaged motor of the air fryer:

If the motor of your Ninja air fryer gets damaged, the fan may not work. There are two general symptoms to identify the motor failure of your air fryer. Firstly, the motor doesn’t receive power.

Secondly, you may smell an odor that resembles burnt plastic or electronics inside the air fryer. When you find any of these issues, you can conclude that the fan is not working due to the damaged motor of the air fryer.

Either replace the motor or contact an air fryer technician for assistance.

4. Broken or damaged internal parts:

Some of the internal parts of your Ninja air fryer might be broken or damaged. As a result, your air fryer’s fan will not work.

In this case, disassemble your air fryer. To do this, read the instructions in your Ninja air fryer user manual. Inspect all internal parts to ensure that they’re in good condition. Take assistance from a technician if necessary.

5. Overheated unit:

Overheating is another reason why the fan of your Ninja air fryer isn’t working. The fan will stop working when heat mounts up within your air fryer unit and is no longer under control. Due to frequent and intensive use, the fan may stop functioning.

Stop the electricity flow into your air fryer. Allow your gadget to cool down.

Why Did My Ninja Air Fryer Stop Working?

It might happen that while cooking, your Ninja air fryer suddenly stopped working. Don’t get frustrated. There are several causes and remedies for this issue. Now, we are going to discuss those:

Why Is Your Ninja Air Fryer Stopped Working?

1. Power outage:

Most likely, there was a power outage in your area or house. And the power supply to the air fryer was lost, causing your Ninja air fryer to stop working.

In this case, you must wait for the electricity to come back.

2. Overheated air fryer:

Your Ninja air fryer most likely overheated because of nonstop operation. For this reason, your Ninja air fryer stopped working.

In such a situation, you should disconnect the air fryer from the wall outlet and let it cool down. Wait a few minutes before reconnecting the air fryer.

3. Damaged circuit board:

Perhaps your Ninja air fryer stopped working as its circuit board burned out.

Therefore, you should check the air fryer’s circuit board to ensure it is not burned or damaged.

4. Damaged power cord:

While cooking, the power cord of your Ninja air fryer somehow got damaged. For this reason, the air fryer stopped working.

Inspect the power cord. Ensure it is not burned or damaged. Replace it if necessary.

5. Timer reached its countdown:

Perhaps the timer of your Ninja air fryer that you set expired. It reached the end of the countdown, and the air fryer unit stopped automatically.

In this situation, reset the timer and start cooking accordingly.

6. Displaced basket or tray:

While cooking, the basket or the tray of your Ninja air fryer somehow shifted from its proper place. Consequently, it stopped working.

To address such a situation, you should always ensure the proper placement of the basket or the tray inside the air fryer.

7. Damaged motor:

While you were cooking, probably the motor of your Ninja air fryer was damaged. So, it stopped working.

In such a case, replace the motor with the assistance of a technician.

8. Damaged heating element:

Your Ninja Air Fryer stopped working if its heating element was broken or damaged.

In this situation, you need a seasoned technician’s assistance to replace or repair the heating element.

9. Overloaded basket:

Perhaps you overloaded the basket with food when you were cooking. So, it stopped working.

In such a case, lessen the volume of food from your Ninja air fryer. 

Ninja Air Fryer Not Heating Up!

Sometimes you may run across one of the most common issues with your Ninja air fryer. That is – your Ninja air fryer isn’t heating up properly. It might happen for a few reasons. Now we are going to discuss them with their solutions:

Why Is Your Ninja Air Fryer Not Heating Up?

 1. Defective socket:

Your Ninja air fryer may not be heating up due to a defective socket. Allow your air fryer to cool down by unplugging it. After that, reconnect your air fryer to a different socket. If your air fryer starts cooking food, you can be sure that the previous socket is defective or damaged, which is why it isn’t heating up.

2.  Faulty power cord:

Your Ninja air fryer will not heat up if its power cord is damaged. Inspect the power cord to ensure that it is in good working order. If it is damaged, replace it with a new one.

3.  Damaged heating element:

The heating element is one of the crucial parts of an air fryer. Your Ninja air fryer won’t be heating up if its heating element is damaged. If so, replace the damaged heating element by following the Ninja air fryer user manual or contact a certified technician for assistance.

4. Wrongly installed basket or tray:

Most likely, you have installed the basket or the tray inside your air fryer incorrectly. This is why your Ninja air fryer is not heating up. So, before using the air fryer, make sure the basket or the tray is properly installed inside.

5. Damaged fan:

 If the fan of your Ninja air fryer becomes damaged or defective, the air fryer won’t heat up. So, inspect whether the fan is working or not. If it is damaged, replace it with a new one. If necessary, you can bring the air fryer to a repairman.

6. Inadequate temperature setting:

Your Ninja air fryer may not appear to be heating up at all due to the low temperature you have set. Selecting the lowest temperature setting on a device can occasionally lead to confusion. Therefore, ensure your temperature setting is adequate to heat your Ninja air fryer.

7. Broken temperature switch:

Your Ninja air fryer may not be heating up because of its broken temperature switch. So, make sure your air fryer’s temperature switch is functioning properly. If it is not, then replace the broken or damaged air fryer temperature switch by purchasing a new one.

Ninja Air Fryer Shuts Off While Cooking!

Your Ninja air fryer may shut off while you are cooking. This issue is not exceptional at all. There are several causes blamable for this trouble. Let us discuss those along with their probable remedies.

Why Your Ninja Air Fryer Shuts Off While Cooking?

1. The power outlet has become damaged:

Due to shortcircuits or any other reason, the outlet you are using for your Ninja air fryer’s power supply has become damaged. This might be the reason why your air fryer has shut off suddenly while cooking. In these circumstances, you should better connect the power cord of your air fryer to a different outlet.

2. The power cable has become worn out:

If the power cable of your Ninja air fryer has worn out, the power supply to your air fryer will be interrupted. The air fryer may shut off suddenly during frying. Always ensure that the power cable is in good shape. If it becomes worn out or damaged, you should replace it.

3. The circuit Breaker has tripped: Because of circuit overload, a short circuit, or other reasons, the circuit breaker of your kitchen has tripped. There is no power supply to your Ninja air fryer. Consequently, it has shut off. Reset the circuit breaker.

4. The motor has become damaged:

Your Ninja air fryer will shut off if its motor becomes damaged during cooking. Check the motor with the help of an expert. Replace it if it is damaged.

5. The heater has become inoperative:

Your Ninja air fryer may shut off while cooking if its heating element suddenly becomes inoperative. Don’t get nervous. Purchase a new one and replace it with the assistance of an expert.

6. The circuit board has become blown:

During cooking, your Ninja air fryer may have shut off due to its blown circuit board. Check its status. You may ask for the help of an experienced technician in this regard.

7. The fan has stopped functioning:

While cooking, the fan of your Ninja air fryer has stopped functioning. As a consequence, the air fryer has also shut off. The fan may malfunction for several reasons. We have already discussed them earlier.

8. The basket has been misplaced:

During cooking, the Ninja Air fryer basket somehow moved out of its correct position. As a result, it shuts off. You must always ensure that the basket is not misplaced in the air fryer.

9. TheBasket has been overloaded:

Putting too much food inside your Ninja air fryer is risky. It can overheat the unit and force it to shut off while cooking. You may study the specifications of your appliance and find out the maximum limit of food allowed in its basket. Never go beyond the basket capacity.

10.  Power failure:

Probably a power failure has occurred in your locality while you are frying with your Ninja air fryer. Your air fryer has shut off because of this. You should check your freezer or any electric appliances in your house. Observe whether they are in the same condition as your air fryer. If it is so, you have nothing to do but wait for electricity to return.

Ninja Air Fryer Making Loud Noise!

Typically, air fryers make noise when they operate. Primarily, the rotation of the fan inside the air fryer is responsible for this noise. This is also true for Ninja air fryers.

On average, they have noise levels between 30 to 66.1 decibels as reported by online contributors. You can use a sound level meter app to detect the noise level of your Ninja air fryer. Download it from the app store on your Android or IOS.

If you find that the noise level of your air fryer has surpassed the average noise level of the Ninja air fryer, you should address the issue seriously. There might be other reasons behind this inconvenience. Let’s explore those reasons and their solutions.

Why Is Your Ninja Air Fryer Making Loud Noise?

1. Manufacturing defect:

If your Ninja air fryer is new and still makes a loud noise, there might be a manufacturing defect. You can call Ninja customer care for a replacement or repair.

2. Broken internal component:

If any internal component of your Ninja air fryer is broken, the broken component may be the source of the loud noise. In this case, you have to check for the damaged component and replace them.

3. Loosened internal parts:

Perhaps, the loud noise your air fryer makes while operating is caused by loosened internal components. Ensure all internal components of your device are functioning properly.

4. Leftover food particles or debris:

Your air fryer may produce a loud noise if debris or leftover food particles are stuck on its fan. You should check the fan. Clean the stuck food particles or debris properly because they could hinder the usual rotation of the fan. Subsequently, a loud noise would be produced.